The SASS Wild Bunch Forum

Wild Bunch Boards => The Wild Bunch Wire => Topic started by: Back 40 on July 01, 2017, 08:50:04 PM

Title: Model 12 replacement magazine spring
Post by: Back 40 on July 01, 2017, 08:50:04 PM
I'm having a senior moment...............  who sells the "load 6" replacement magazine springs and follower?
Title: Re: Model 12 replacement magazine spring
Post by: DUSTY BODDAMS on July 01, 2017, 09:08:04 PM
Back 40, just a regular spring from brownells will have you running and gunning! Dusty
Title: Re: Model 12 replacement magazine spring
Post by: Back 40 on July 01, 2017, 09:14:45 PM
Thanks DB, could you please tell me which one?
Title: Re: Model 12 replacement magazine spring
Post by: KingSnake on July 02, 2017, 06:58:16 AM
....  who sells the "load 6" replacement magazine springs and follower?
Wild Bodie Tom
Title: Re: Model 12 replacement magazine spring
Post by: DUSTY BODDAMS on July 02, 2017, 07:34:29 AM
Back 40, I think just a generic 12 ga. Mag tube spring and cut to length But if the cat daddy is wanted they have stainless steel at Nu-line guns for 14.95 stock number NLG-16212ss I don't need one but I think I will order a couple........
Title: Re: Model 12 replacement magazine spring
Post by: Garrison Joe on July 03, 2017, 09:35:46 AM
The usual Wild Bodie Tom spring and follower to allow 6 shots in the tube is made for the Win 97 (specifically, the IAC imports need it the most). 

If you need one for the 97, see
Uniquetek - http://www.uniquetek.com/product/T1413

But Tom also now makes a spring and weighted follower for the Mod 12 -
Uniquetek - http://www.uniquetek.com/product/T1528

And, yep, Nu-Line has lots of Model 12 parts and even does service work on them.

But, if all you need is a new mag spring, the Rem 870 mag spring works fine and is easy to find.  Shorten to hang 4 inches of the uncompressed spring out of the end of the mag tube when no end cap on the tube.

(Then take that M12 and go shoot a few Southern Illinois hickory-fed fox squirrels for me, will ya?  Yummm, chicken-fried)

Good luck, GJ

Title: Re: Model 12 replacement magazine spring
Post by: Back 40 on July 03, 2017, 11:17:06 AM
Thanks for the info Joe.