Author Topic: Alcan #5  (Read 1862 times)

Blaze Kinkaid 253

  • Newbie
  • *
  • Posts: 24
Alcan #5
« on: July 05, 2016, 04:14:32 PM »
  Pards;  Acquired a 3# round paper/cardboard canister, metal top & bottom, of Alcan #5 smokeless  shotgun powder.  I can't find it listed on my powder burn rate chart to give me an idea of how hot it is.  Anybody familiar with this powder?  Is it suitable for .45 ACP?  All suggestions will be helpful.
Regards
Blaze
Member of SASS since 1988
Member of  World Fast Draw since 1958
Clubs:  Los Vaqueros
Tombstone Buscaderos
Tombstone Ghost Rider Outlaws
Tombstone Shootist Soc. W.B.
Ladder 5 Gang
I may not be as fast as I once was, but I'm as fast once as I ever was!
† "He calls me Friend" †

Garrison Joe

  • Hero Member
  • *****
  • Posts: 764
Re: Alcan #5
« Reply #1 on: July 05, 2016, 11:26:03 PM »
Last sold about 1975.    So old that loads for it were for hulls and wads that are no longer available.  And that was back when shotshell powder did not get listed very often in the handgun loading data section.  It was a rather slow powder, so it was only recommended for 1 1/8 and mostly 1 1/4 field loads.   So, not all that useful for Cowboy loads.

It would make great lawn fertilizer, though.

Good luck, GJ

Here's a post showing an old AL5 load with Win AA hulls:
http://www.shotgunworld.com/bbs/viewtopic.php?f=13&t=80118

And another showing .45 auto and .45 Colt loads, but read it carefully as there is bad data in part of it:
http://www.pistolworld.com/bbs/viewtopic.php?t=2776
« Last Edit: July 07, 2016, 02:55:35 PM by Garrison Joe »
Good luck, GJ

Ride hard, shoot straight and speak the truth.    Col. J Cooper
Why else would you want to be here?

60708 Life/Regulator

Blaze Kinkaid 253

  • Newbie
  • *
  • Posts: 24
Re: Alcan #5
« Reply #2 on: July 06, 2016, 08:38:56 AM »
Thanks Garrison Joe, appreciate the feed back.  Belated congratulations on your EOT World Championship Wild Bunch Win!  August West, Gillyboy, and I put on the Wild Bunch match at the Tombstone Livery here every month.  Regards
Blaze
Member of SASS since 1988
Member of  World Fast Draw since 1958
Clubs:  Los Vaqueros
Tombstone Buscaderos
Tombstone Ghost Rider Outlaws
Tombstone Shootist Soc. W.B.
Ladder 5 Gang
I may not be as fast as I once was, but I'm as fast once as I ever was!
† "He calls me Friend" †

Garrison Joe

  • Hero Member
  • *****
  • Posts: 764
Re: Alcan #5
« Reply #3 on: July 11, 2016, 09:00:10 AM »
Blaze -
Thanks for the kind words about EOT. 

I'd probably think more seriously about coming down for one of your fine WB monthly matches if it weren't 7 hours of driving for a 3 hour match, and then 7 hours to get back.   Maybe when I get retired.   ;D

Good luck, GJ

Ride hard, shoot straight and speak the truth.    Col. J Cooper
Why else would you want to be here?

60708 Life/Regulator

Garrison Joe

  • Hero Member
  • *****
  • Posts: 764
Re: Alcan #5
« Reply #4 on: July 25, 2016, 07:43:11 PM »
Found my oldest Lyman reloading manual today - the 1970-dated 45th edition. 

Unfortunately, the Lyman technicians wrote that they only had time to research and publish Alcan #8 powder loads, out of the several powders that Alcan was still making at the time.  So, I found no Alcan #5 data in my best hope for old data.

Sorry, GJ
Good luck, GJ

Ride hard, shoot straight and speak the truth.    Col. J Cooper
Why else would you want to be here?

60708 Life/Regulator

noylj

  • Newbie
  • *
  • Posts: 5
Re: Alcan #5
« Reply #5 on: August 05, 2016, 10:49:28 AM »
Without going into my archives:
.45 Auto
cast bullet #452488, 195gn: Alcan 5; start 5.8gn, Max 8.5gn
Hdy LSWC, 200gn; 9.5gn (someone's pet load, no start or max data)
Spr TMJ-SWC, 200gn; 8.0gn (someone's pet load, no start or max data)