Jump to content
SASS Wire Forum
polishcappers

2018 brand new Polish Capper model PCC - for Colts, Reminton, ROA, R&S,Lemat,ROA etc....

Recommended Posts

Ordered 5/4, received today.

 

Very nice!

Share this post


Link to post
Share on other sites

Yep, ordered mine on 5/1, got it in my hands today.  I'm loading it up and I'm about to test it out.

 

 

Share this post


Link to post
Share on other sites

OK, here's my preliminary review of the Polish Capper:

After I unwrapped it I looked it over and was pleased with the overall manufacture of the product.  Only one sharp edge on the lower portion of the lid, by the head.  I'm sure that just a quick pass with a stone will correct that.

I used it first on a Colt 1851 and it worked perfectly.  Easy on, easy out with the caps seated nicely.   I use Slik-X nipples and they seem to be the perfect size.  There was enough clearance on both sides of the head to for easy operation.

Not quite the same experience with the Ruger Old Army, the capping head is just a bit too wide, (I haven't taken a micrometer to it yet.)  But the sides of the capping head were gouged by the nipple opening of the ROA's.  I believe if I narrow the head a little, this will fix the problem.  More about that in the future.

Middling success with Pietta New Armies.  I was using stock nipples, and often the caps would not stay on the nipples, but stayed in the capper head.  I'm going to switch out to Slik-X nipples and I'm confident that will fix the issue.

 

Be sure to watch the Polish Capper Videos, they do not function the same as the Ted Cash Snail Cappers or the Straight Line Cappers.  This is a different product, and operates a little differently.  I managed to send a fair amount of caps to the floor until I got the hang of it.

 

As I said, this is very preliminary, I've only had the capper for two hours, and I plan on spending much more time with it, and ever-so-slightly modifying it for easier use with the ROA.  Meantime, I'm all set to go with any of the Colt-type percussion pistols.  I'm looking forward to giving it a run at a match, Saturday!

 

~Duc~

  • Like 1

Share this post


Link to post
Share on other sites

Ordered mine a couple weeks ago and it came in yesterday, I tried it on a 1860 Uberti and 1851 Pietta with Slix nipples and a Remington NMA with Treso's, At first it didn't work the caps weren't staying on then I figured out that I had to put them on firmly and wiggle the capper just a bit before I pulled it off,  Putting the cap on and seating at the same time is nice!

 I really like not having to fill the inline cappers the darn things took forever to load and I needed 5 or 6 of them for a match, I didn't mind the snail capper for the Colt's but the Polish one is nice since it seats the caps which eliminates one step in the loading process.

Share this post


Link to post
Share on other sites

Hello, thank you for your feedback. this is very valuable for us as we do not have a chance to test our capper on all models of revolvers specially we do not have in Poland Rugers Old Army  at all. We assumed that if it works on Colt Navy 1851 .36 with medium size frame then it should work on ROA as well. It seems that it is little bit to thick in the head size and the head needs to be little bit narrower. So if you can measure the current head filled down little bit to fit your ROA please give us this valuable feedback. We will adjust it in the next production run if possible to be fully fit to ROA revolvers. As I mentioned we do not have possibility to try ROA in Poland. I hope you can adjust the head easily and it will work great. We change the description in our shop temporarily erase the ROA from specification until we will fix it during next production run. Nevertheless our capper should work with Colts and Remingtons and Rogers Spencer fine. Please watch our videos because as you pointed correctly the action is completely different to snail type cappers. 

 

TIP:  1. Newer open /use the actuator/ when you point capper down. You must use actuator to push the cap towards the head when the head is little bit upright position. So not allow to fall free cap into the head. Watch our video with transparent lid to help you practice this movement.

TIP 2: Please try to push the cap on the nipple not to much and not to weak just enough to stay on it. Please match the correct size of the cap and nipple and you will not have any issue with not staying cap. So the movement must be aligned with the nipple. Push and go back. it is not possible to go side way as in other cappers on the market. Here is push and reverse movement. Forward and back the same path. Please do not try to bend the head when you are inside the cylinder. You can damage your capper. And do not use to much force because the capper is quite big in the hand and you can easily over power your push towards nipple. You need to find correct movement and master it. then you will be able to load your revolver in several seconds without any issue. 

Thanks for your feedback and please inform us about correct size of the head for ROA cylinder. The difference will be thousandths of the inch for sure.

 

best regards,

Polish Cappers

  • Thanks 2

Share this post


Link to post
Share on other sites

Ordered on the 3rd and it arrived Yesterday. :)

Share this post


Link to post
Share on other sites

Hello, next orders for PCC cappers from USA, UK, and Australia thanks a lot. We have c.a. 150 units of PCC on stock right now. Please visit our shop here http://www.polishcappers.com this is the only place where our products are available.

 

 

best regards,

Polish Cappers

Share this post


Link to post
Share on other sites

Exciting day!!!  Bordertown has its first ever INTERNATIONAL SPONSOR!!!!  Polish Cappers has donated 3 of their much sought after Brass Cappers...  VERY COOL and THANK YOU VERY MUCH!

E6EEC6E3-488C-4196-BFC8-22983CE4DFE7.jpeg

  • Like 2

Share this post


Link to post
Share on other sites

The one for Australia is me ordering a second one.

Always have a spare!

  • Like 1

Share this post


Link to post
Share on other sites
Posted (edited)

Nice Major Crimes, it is pleasure to hear that you enjoy our cappers. Today we received next order from New Jersey, thank you your capper is already sent.

We receiving many very nice words from You our Customers. We have over 200 feedbacks that our product is awesome, top notch quality etc.  This is very nice indeed. We observe also that in the last few weeks our delivery time to US is very short. We received many feedback that we delivered less then 10 days, sometimes less then a week. 

 

Here is such a example from our Customer:

Received today, less than a week from Poland, very fast shipping.

Excellent capper, works great with my Uberti 1858 New Army’s.

I was a little concerned about making an international order.  Your communications with the customer have been excellent.

I will certainly recommend you to my friends

Thank You. "

 

This feedback is very important to us because we see you have still some concerns making international order. We understand this. We can guarantee that you can be 100% secure working with us. You have 100% guarantee that your purchased capper will be delivered to you. We sending via registered letters, we have tracking numbers of all our cappers sent to you. You can ask your local Post office for help if there is something postponing. We have up to now 100% delivery rate all over the world. So you have no reason to be afraid that you do some international order. We are over one year now on the market with our cappers. I think we started to build our quality and trust in the eyes of our Customers. Our mission is to be the best capper producer in the world with the best possible service and serve our Customers with pleasure, have good communication , treat all of you with respect and be close to you as "family". 

Thank you again for your commitment and your support. We are sure that our products will be soon use in most places where people like black powder smell ;).

Please remember, we starting as the producer of our PCA model for Remington Users as we know that there was not so good solutions on the market supporting this nice revolver. Then many many Customers asking us to extend our range of cappers for Colts revolvers. After one year we decided to made it and now PCC model is available supporting most of the revolvers including Colts. We will see how this small business will be working. For sure we can guarantee you that we will not stop it until we will generate profit to survive on the market. I hope there is so many Customers in the world that sooner or later we will be able to increase our production and lower the costs. Now it is not possible and our products are quite valuable but it is so many operations involved to produce our cappers that the price must stay on this level now. We treat this business more like hobby and the scale is very tiny now (one capper sold per day in average) so we hope that this rate will increase soon. There are millions of users and potential our Customers, please share with your friends our products. You are our ambassadors, only you can show our product to other potential customers. We do not have funds for big advertisement so please help us to be visible as much as you can. You can go to our FaceBook page and give us a like the same on YT channel, you can demonstrate our capper to other etc. Please help us to speed it up. Nevertheless thank you again we are proud of our product and I hope we will have success soon being the company of first choice regarding cappers for your guns.

 

Cheers,

Polish Cappers

Http://www.polishcappers.com

 

 

PS. New order from North Dakota, thank you we will send your capper on Monday.

Edited by polishcappers
new order info

Share this post


Link to post
Share on other sites

Hello, New order from Tennessee just arrived. Thank you very much, we will send your capper today.

 

Best regards,

Polish Cappers

Share this post


Link to post
Share on other sites

Hello , next order from Nevada just Arrived, we will send your capper today.

 

Best regards,

Polish Cappers

Share this post


Link to post
Share on other sites

Hello, Please watch our brand new video showing how to operate correctly our brand new PCC universal capper. 

 

Please watch whole material here:

 

 

 

Thank you very much,

 

best regards,

Polish Cappers

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×

Important Information

By using this site, you agree to our Terms of Use.